The makers
We didn't come to compete. We came to set the standard.
We started because the detail kept getting lost on site.
Verre was founded by glaziers who were tired of watching beautiful drawings arrive on site and leave compromised. So we took the whole chain in-house: measure, shop drawing, engineering, fabrication liaison and installation.
That means when an architect specifies a 3.2 metre frameless leaf on a concealed pivot, there is no phone call explaining why it cannot be done. There is a shop drawing showing exactly how it will be.
We work across South East Queensland with builders, architects, interior designers and private clients who care about the millimetre. We are innovators by necessity — the projects we like best are the ones with no precedent.
Process
Four stages, no handoffs.
Consult
We read the drawings, then we read the site. Tolerances, substrates, access, sequencing — resolved before a pane is ordered.
Design
Shop drawings developed alongside your architect. Every junction, reveal and shadow line documented and signed off.
Engineer
Glass thickness, interlayers and fixings certified for span, wind and impact. Nothing on our sites is assumed.
Install
Our own crews, our own rigging. Protected, aligned to the ceiling grid, cleaned and handed over defect-free.
Why clients choose Verre
One point of accountability
The person who measured your job is the person who signs off the handover.
Engineering, not guesswork
Certified glass thickness, interlayers and fixings for every span and wind load.
Programme discipline
Staged installs sequenced with your builder so glass never becomes the critical path.
Defect-free handover
Protected, aligned, cleaned and reviewed against the shop drawing before we leave.
